UV-resistant, clear epoxy casting resin with low viscosity for easy mixing and minimal bubble entrapment.
- Shore Hardness: 80 D
- Mix Ratio: 100A:30B by weight
- Pot Life: 5 hours
- Cure Time: 24 hours
- Maximum casting thickness: 0.95 cm (3/8 in.)
Rounding out the craft ecosystem is Smooth-Cast 326, a fast-curing liquid plastic formulated to readily accept SO-Strong and CastMagic pigments for vibrant, translucent, or cold-cast metallic props. For personal keepsakes, Alja-Safe provides a skin-safe, crystalline-silica-free alginate that captures microscopic skin lines for single-use hand and body casting molds, curing quickly and releasing cleanly using warm water.
UV-resistant, clear epoxy casting resin with low viscosity for easy mixing and minimal bubble entrapment.
Clear, high-gloss epoxy coating and encapsulant, for wood, plaster, concrete, foam, fabrics, paper, etc. and to encapsulate 2-D or 3-D objects.
Color-neutral urethane resin, part of the ColorMatch™ Series, designed to achieve accurate color representation or filler effects.
Medium-high density flexible polyurethane foam with approximately 6x expansion.
Lightweight, high-strength, low-density urethane casting resin. Castings made of Feather Lite™ will float in water.
Skin-safe and respiratory-safe alginate molding powder, free of crystalline silica, capturing fine detail for single-use molds.
Liquid alginate for skin-safe moldmaking.
Fiber-reinforced, non-sag, life-casting alginate for detailed molds of a life subject.
| Product | Cure Time | Specific Gravity | Specific Volume | Color | Tensile Strength | Tensile Modulus | Compressive Strength | Compressive Modulus | Flexural Strength | Shrinkage | Heat Deflection Temp | Tensile Elongation | Flexural Modulus | Refractive Index | Mixed Viscocity | Mix Ratio By Weight | Pot Life | Shore D Hardness | Color | Mixed Viscocity | Cure Time | Flexural Strength | Pot Life | Flexural Modulus | Specific Volume | Specific Gravity | Mix Ratio By Weight | Shrinkage | Tensile Strength | Shore D Hardness | Heat Deflection Temp | Compressive Strength | Tensile Elongation | Tensile Modulus | Compressive Modulus | Refractive Index | Mix Ratio By Volume | Tack Free Time | Thin Film Working Time | Thin Film Recoat Time | Mixed Viscosity | Elongation At Break | Mix Ratio By Volume | Elongation At Break | Handling Time | Expansion | Foam Density | Expansion | Foam Density | Handling Time | Ultimate Tensile | Ultimate Tensile |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EpoxAcast™ 690 | 24 h. | 1.10 g/cc | 25 cu. in./lb. | Clear | 6,630 psi | 572,000 psi | 9,610 psi | 91,300 psi | 10,980 psi | 0.002 in. / in. | 115 °F | 1.8 % | 410,000 psi | 1.565 nm | 280 cps | 100A:30B | 5 h. | 80 | Clear | 280 cps | 24 h. | 10,980 psi | 5 h. | 410,000 psi | 25 cu. in./lb. | 1.10 g/cc | 100A:30B | 0.002 in. / in. | 6,630 psi | 80 | 115 °F | 9,610 psi | 1.8 % | 572,000 psi | 91,300 psi | 1.565 nm | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tarbender | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Clear | - | 16 h. | - | 45 min. | - | 25.4 cu. in./lb. | 1.09 g/cc | 100A:41B | - | - | 75 | - | - | - | - | - | - | 2A:1B | 8 h. | 2 h. | 6 h. | 1,100 cps | - | - | - | - | - | - | - | - | - | - | - |
| Smooth-Cast™ 326 | 60 min. | 1.07 g/cc | 25.9 cu. in./lb. | Clear Amber | 3,170 psi | 140,000 psi | 3,080 psi | 32,200 psi | 3,100 psi | 0.0075 in. / in. | 120 °F | - | 95,700 psi | - | 100 cps | 115A:100B | 9 min. | 72 | Clear Amber | 100 cps | 60 min. | 3,100 psi | 9 min. | 95,700 psi | 25.9 cu. in./lb. | 1.07 g/cc | 115A:100B | 0.0075 in. / in. | 3,170 psi | 72 | 120 °F | 3,080 psi | - | 140,000 psi | 32,200 psi | - | 1A:1B | - | - | - | - | 10 % | 1A:1B | 10 % | - | - | - | - | - | - | - | - |
| FlexFoam-iT!™ X | 2 h. | 0.16 g/cc | 157 cu. in./lb. | White | - | - | - | - | - | - | - | - | - | - | 1,000 cps | 105A:100B | 50 sec. | - | White | 1,000 cps | 2 h. | - | 50 sec. | - | 157 cu. in./lb. | 0.16 g/cc | 105A:100B | - | - | - | - | - | - | - | - | - | 1A:1B | - | - | - | - | - | 1A:1B | - | 45 min. | 6 times | 10 lb/ft³ | 6 times | 10 lb/ft³ | 45 min. | - | - |
| Feather Lite™ | 2 h. | 0.67 g/cc | 41.3 cu. in./lb. | Beige | - | 156,000 psi | 3,070 psi | 53,700 psi | 3,440 psi | 0.003 in. / in. | 140 °F | - | 164,300 psi | - | 410 cps | - | 8.5 min. | 58 | Beige | 410 cps | 2 h. | 3,440 psi | 8.5 min. | 164,300 psi | 41.3 cu. in./lb. | 0.67 g/cc | - | 0.003 in. / in. | - | 58 | 140 °F | 3,070 psi | - | 156,000 psi | 53,700 psi | - | 1A:1B | - | - | - | - | 1.6 % | 1A:1B | 1.6 % | - | - | - | - | - | - | 2,160 psi | 2,160 psi |
| Alja-Safe™ | 8 min. | - | 26 cu. in./lb. | Light Purple | - | - | - | - | - | - | - | - | - | - | Variable | 4 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder | 5 min. | - | Light Purple | Variable | 8 min. | - | 5 min. | - | 26 cu. in./lb. | - | 4 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder | - | - | - | - | - | - | - | - | - | 1 Part Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder | - | - | - | - | - | 1 Part Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder | - | - | - | - | - | - | - | - | - |
| Alja-Safe™ Breeze | 8 min. | - | 26 cu. in./lb. | Blue | - | - | - | - | - | - | - | - | - | - | Variable | - | 3 min. | - | Blue | Variable | 8 min. | - | 3 min. | - | 26 cu. in./lb. | - | - | - | - | - | - | - | - | - | - | - | 5 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Breeze liquid | - | - | - | - | - | 5 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Breeze liquid | - | - | - | - | - | - | - | - | - |
| Alja-Safe™ Acrobat | 8 min. | - | 26 cu. in./lb. | Off White | - | - | - | - | - | - | - | - | - | - | Variable | 3 parts water to 1 part Acrobat® by weight | 5 min. | - | Off White | Variable | 8 min. | - | 5 min. | - | 26 cu. in./lb. | - | 3 parts water to 1 part Acrobat® by weight | - | - | - | - | - | - | - | - | - | 1 Part warm water (80° F / 27° C) to 1 Part Alja-Safe Acrobat® powder | - | - | - | - | - | 1 Part warm water (80° F / 27° C) to 1 Part Alja-Safe Acrobat® powder | - | - | - | - | - | - | - | - | - |