PLA filament AzureFilm Original / 1kg

Name: PLA filament AzureFilm Original / 1kg
SKU: PLARefChampagneGold1.75mm1kg
Price: 19.24 EUR
Availability: InStock

PLARefChampagneGold1.75mm1kg ⓘ

3D printing

Color

ANTHRACITE BLACK BLUE BROWN CARIBBEAN GREEN CHAMPAGNE CHAMPAGNE GOLD CORAL RED CYAN EMERALD EMERALD GREEN FOGGY WHITE FUCHSIA PINK GALAXY BLACK GOLD GREEN LAGOON LIGHT GREEN LIGHT GREY MAGENTA MARBLE NAVY BLUE ORANGE PINK PISTACHIO GREEN PURPLE RED RED WINE SHARK GREY SILVER SUNSET ORANGE WHITE YELLOW

Diameter

1.75 2.85

Packaging

PLA 1KG 1.75mm PLA 1KG 2.85mm PLA Refill 1,75mm 1kg

AzureFilm PLA Original is a reliable, general-purpose PLA filament for straightforward printability and consistent performance in everyday 3D printing.

Printing Temperature: 200°C – 230°C
Bed Temperature: 50°C – 60°C (recommended)
Diameter: 1.75 mm and 2,85 mm
Mechanical Properties: Medium strength, low flexibility, and medium durability
Warping/Shrinkage: Minimal

WARNING! This article is for professional use only.

This article cannot be checked out as a consumer and is strictly for B2B sales.
It does not meet the packaging and labelling requirements for the consumer market.
B2B sales are excluded from the statutory right of withdrawal (14-day cooling-off period).

€ 15.90

(€ 19.24 with 21% VAT)

Description

AzureFilm PLA Original is a reliable, general-purpose PLA filament, designed for straightforward printability and consistent performance in everyday 3D printing.

Key Technical Specifications

Printing Temperature: 200°C – 230°C
Bed Temperature: 50°C – 60°C (optional/recommended)
Diameter: 1.75 mm and 2,85 mm
Mechanical Properties: Medium strength, low flexibility, and medium durability
Warping/Shrinkage: Minimal

Main Advantages

Beginner-Friendly: The filament flows predictably and adheres well to standard print surfaces like PEI sheets, glass beds, or blue tape (often enhanced with adhesive sprays like 3Dlac).
Odorless: Like most standard PLAs, it prints pleasantly indoors because it doesn't emit harsh chemical fumes.
Wide Color Selection: Available in a vast catalog of solid, transparent, and unique variations.
European Production: Manufactured locally within the EU.

Instructions

General guidelines for settings and printing for the best results with AzureFilm PLA Original:

Printer Settings

Nozzle temperature: Set between 200 °C and 220 °C. Start at 210 °C. Adjust based on stringing or layer adhesion.
Bed temperature: Set between 50 °C and 60 °C. PLA prints on a cold bed. A heated bed prevents warping.
Print speed: Aim for 50-100 mm/s. Print faster on high-speed printers by slightly increasing nozzle temperature.
Cooling fan: Set to 100% after the first layer. Maximum cooling ensures sharp details and clean bridges.

Bed Adhesion & Surface Preparation

Clean surface: Wipe the print bed with isopropyl alcohol (IPA) before printing. This removes finger oils.
Bed types: Works perfectly on PEI sheets, glass, or aluminum.
Adhesive: Use a thin layer of glue stick or 3D-Lac spray if prints detach.

Use & Storage

Moisture control: PLA absorbs moisture from the air. This causes bubbles and stringing. Store the spool in a sealed bag with silica gel when not in use.
Drying: If the filament crackles or pops during printing, dry it. Use a filament dryer at 45 °C to 50 °C for 4 to 6 hours.