Description
This product is a single component, low-viscosity liquid designed to prevent cure inhibition when pouring platinum silicone rubbers over various surfaces. These surfaces include sulfur clay, instant adhesives, tapes, wood surfaces, some plastics, SLA resins, and others. It ensures compatibility and prevents bonding issues with sensitive materials.
Features
- Single component, low-viscosity liquid
- Prevents cure inhibition for platinum silicone rubbers
- Compatible with a variety of surfaces
Technical Properties
- Available Sizes: Pint Unit (0.34 kg), 1 Gallon Unit (2.72 kg), 5 Gallon Unit (13.15 kg)
- Flammable product
Use Cases
- Pouring platinum silicone rubbers over sulfur clay
- Use with instant adhesives, tapes, wood surfaces, some plastics, and SLA resins
Instructions
Recommended: Conduct a small-scale test on a similar surface before using on a valuable model. This product has a limited shelf life and should be used as soon as possible.
Application
- Apply at least two coats using a soft brush. Apply a thorough coating over all surfaces that will contact rubber, including intricate details, and let dry. Follow with another application and let dry.
- If using a non-aerosol pump spray, apply a light mist coating to all surfaces that will contact rubber, brush over all surface areas, and let dry. Follow with a second light mist coating.
- Follow with an application of Ease Release™ 200 Release Agent.
Special Instructions for Platinum Silicones
- Platinum silicones are especially sensitive to sulfur-bearing clays and tin-cured silicones. Apply 3 coatings prior to applying the release agent.
Important: In many cases, this product may act as an adhesive and bond platinum silicone. After applying to a surface, let the final coat dry and apply a light mist coating of Ease Release™ 200 Release Agent.
Safety and Handling
- Warning: This product is flammable. Exercise extreme caution and follow safety protocol for handling flammable liquids.
- Refer to the MSDS for further safety information.
