SO-CURE™

Description

SO-CURE™ cure Accelerator is an additive designed to speed up the cure time of certain urethane liquid plastic products without significantly affecting their ultimate physical properties. This allows for much faster demolding of a part or casting from a mold.

Technical Properties

• Color: Clear Amber
• Mixed Viscosity: 200 mPa·s
• For Industrial Use Only
• WARNING: Known to the state of CA to cause cancer, birth defects, or reproductive harm - www.P65Warnings.ca.gov

Available Sizes

• Pint Unit (0.45 kg)
• 1 Gallon Unit (4.08 kg)
• (Not all sizes may be available online)

Instructions

Safety

Use in a properly ventilated area. Wear safety glasses, long sleeves, and rubber gloves to minimize contamination risk.

Storage

Store and use material at room temperature (23°C/73°F). This product has a limited shelf life and should be used as soon as possible.

Measuring & Mixing

The accelerator is added to Part B by weight and should be thoroughly mixed with Part B before adding Part A. Important: Adding the accelerator drastically reduces the pot life of the liquid plastic product.

Example

To reduce the demold time of Task™ 4 from 16 hours to 1 hour, add 2.5 grams of accelerator to 100 grams of Task™ 4 Part B. Mix thoroughly for one minute, making sure that you scrape the sides and bottom of your container several times. Next, add 100 grams of Part A and mix thoroughly for one minute, again making sure that you scrape the bottom and sides of your container several times. Do not delay between mixing and pouring, as your Pot Life is about 5 minutes. In one hour, the plastic casting can be demolded from the original mold. Ultimate physical properties will be reached overnight.

Pot Life and Demold Time