Description
This two-component, clear amber adhesive is designed for rapid bonding of metals like steel, aluminum, and brass, as well as wood, glass, masonry, and many hard plastics. It cures quickly, allowing handling in 5 to 10 minutes at room temperature. It is not recommended for use on metals like nickel, chromium, tin, or zinc, nor on soft thermoplastics like polyethylene.
Technical Properties
- Mix Ratio By Volume: 1A:1B
- Pot Life: 2.5 minutes
- Handling Time: 10 minutes
- Cure Time: 16 hours
- Barcol 935 Hardness: 60
- Specific Gravity: 1.17 g/cc
- Color: Clear Amber
- Tensile Strength: 7.58 MPa (1,100 psi)
- Modulus of Elasticity in Tension: 186 MPa (27,000 psi)
- Elongation @ Break: 10+ %
- Modulus of Elasticity in Compression: 793 MPa (115,000 psi)
- Compressive Yield Strength: 31.03 MPa (4,500 psi)
- Mixed Viscosity: Light Paste
This product is intended for industrial use only and should be kept out of the reach of children. It contains chemicals that may expose users to cancer risks, as noted in the Prop 65 warning.
Instructions
Safety
Use in a properly ventilated area. Wear safety glasses, long sleeves, and rubber gloves to minimize contamination risk. Store and use material at room temperature (23°C/73°F). This product has a limited shelf life and should be used as soon as possible.
Surface Preparation
A clean, dry surface is necessary for adhesive bonding. Porous materials should be dry, sanded, and free from dust. Non-porous surfaces should be degreased, dried, and roughened by sanding, sandblasting, or chemical etching. Treated surfaces should be covered within a few hours to prevent contamination. Handlers should wear clean cotton gloves to prevent contamination from body oils.
Measuring & Mixing
Squeeze out equal amounts of Parts A and B onto a disposable surface and mix thoroughly. Use clean mixing tools and containers made of metal, glass, or plastic. Ensure thorough mixing by scraping the sides and bottom of the mixing container several times.
Because no two applications are the same, a small test application is recommended to determine suitability for your project.
