Show basket (0 Article) My accountShow saved listTo checkout

Bronze Gel Coat Kit /650gr

Jesmonite Flex Metal Gel Coats are the latest development in Jesmonite materials. They are formulated using real metal powder to create the ultimate replication of metal in moulded materials. They are four finishes available and they are fully compatible with AC730 as a cast or laminated back up.

Product ID: JESgcBRON650gr

Available now

37,57 EUR

additional. 0% VAT and shipping Versand
Weight: 0.8 kg
piece


Weigh the Liquids and Base into separate clean containers at the following ratio:

AC730 Liquids 1 part by weight
AC730 Bronze Base 5.5 parts by weight

In general, the mixture can be adjusted to suit the application or the needs of the end user. Adding a little Liquid or Base to make fine adjustments is very useful – do small batch trials first to assess the materials suitability to a particular mould or application. The mix should be thick, but easy to apply by brush at 1mm – 2mm thickness.

MIXING
Jesmonite Flex Metal Gel Coats must be mixed using a High-shear Mixing Blade. Attach this blade to a drill with variable speed control on the trigger and slowly add the Base to the Liquids whilst mixing continuously at low speed. As the last powders are added, slowly increase the mix speed to around 1,000rpm and mix for a further 60 seconds or until the mix is smooth, flowing and free from lumps. It is very important to keep the mix stirred whilst applying to stop any settlement of the heavy metal powders contained within the material.

FormX Newsletter About us Contact Shipping Applications FormX Academy Terms of Sales Impressum