Show basket (0 Article) My accountShow saved listTo checkout

Silicone Accesoires & Additives

Silicone Additives

  • Accel-T™

    Accel-T™

    Accel-T™ is a one-component additive that will reduce the cure time of Smooth-On tin cure silicone rubber compounds. more

  • Inhibit X™

    Inhibit X™

    Inhibit X™ is a single component, low-viscosity liquid that provides an added measure of protection against cure inhibition when pouring platinum silicone rubbers over many surfaces including sulfur clay, instant adhesives, tapes, wood surfaces, some plastics, SLA resins and others more

  • NOVOCS™ Gloss

    NOVOCS™ Gloss

    NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly. NOVOCS™ is particulary useful in thinning down Psycho Paint® silicone paint base to apply via brush or airbrush to cured pl ... more

  • NOVOCS™ Matte

    NOVOCS™ Matte

    NOVOCS™ solvents are low viscosity silicone solvents that evaporate quickly. NOVOCS™ is particulary useful in thinning down Psycho Paint® silicone paint base. more

  • Plat-Cat™

    Plat-Cat™

    Plat-Cat™ Platinum Silicone Cure Accelerator is an additive designed to accelerate the cure time of Smooth-On platinum silicone rubber products without significantly affecting the ultimate physical pr ... more

  • Power Mesh

    Power Mesh

    "Power Mesh is an 80% Nylon/20% Spandex blend typically used to reinforce silicone prosthetics more

  • Silicone matting & straightener

    Silicone matting & straightener

    accesoiries to adjust the shine of silicones or to smooth it down during curing. more

  • Silicone Thinner™

    Silicone Thinner™

    Silicone Thinner™ is a non-reactive silicone fluid that will lower the mixed viscosity of tin cure (condensation) or platinum cure (addition) silicone rubber products. more

  • Silthix

    Silthix

    Thickener for tin and platinum silicone rubbers. A few percent change a liquid silicone in a pasty or brushable mass. more

  • Slacker™

    Slacker™

    Slacker™is one component translucent clear fluid that is added to our translucent platinum-cure silicones such as Dragon Skin® and Ecoflex® products. Slacker® will change the “feel” of the silicone r ... more

  • SLIDE™ STD

    SLIDE™ STD

    SLIDE™ STD Liquid Surface Tension Diffuser is an additive for platinum cure silicone rubber that creates a cured silicone piece with greatly reduced surface tension. more

  • SLO-JO™

    SLO-JO™

    SLO-JO™ Platinum Silicone Cure Retarder is an additive designed to extend the pot life (working time) of Smooth-On platinum silicone rubber products and Soama Foama® silicone foam without affecting th ... more

  • THI-VEX™

    THI-VEX™

    THI-VEX™ is made especially for thickening Smooth-On silicones for vertical surface application (making brush-on molds). Different viscosities can be attained by varying the amount of THI-VEX™ added. more

No products were found that match your criteria. Choose other filter options.

*Alle Preise incl. Umsatzsteuer, zuzüglich

Guide

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

  • Molding

    flexible and rigid molding for all sorts of objects.

  • Casting

    a wide range of flexible and rigid casting materials.

  • Special Properties

  • Composites

    resins, poyester, epoxy, acrylic resin, glass fibres etc.

  • Foam

    expanding flexible and rigid foams, rigid blocks.

  • Restoration

    restoring in- and exterior ornaments and buildings.

  • Prototyping

    resins and other materials used for rapid prototyping.

  • Textile

  • Cosplay

    Products to make your own Cosplay Costumes and Props!

FormX Newsletter About us Contact Shipping Applications FormX Academy Terms of Sales Impressum