Skin Tite™

skintitex ⓘ 17F6D5AE-3656-AA43-ABD7-D3476FCB7E62
Platinum Cure Silicone

Soft and flexible skin-safe silicone, used to sculpt fast wounds, scars, etc., directly to the skin and to adhere silicone appliances to the skin. 

  • Skin safe and flexible
  • Adheres to skin and contours
  • Compatible with Silc Pig™ pigments
  • Use THI-VEX™ for thickening
  • Releases from short hair surfaces
€ 404.77

(€ 334.52 without 21% VAT)

In stock

Description

This skin-safe silicone is used for creating wounds, scars, and adhering silicone appliances directly to the skin. It can be sculpted quickly, offering maximum control and staying precisely where applied. The material conforms to all contours and flexes with body movement, ensuring that wounds and appliances remain in place until removed. Certified as skin safe by an independent laboratory.

Features

  • Compatible with Silc Pig™ silicone pigments for a variety of color effects, including hyper-realistic cuts, scars, and bruises.
  • THI-VEX™ thickener can be added for greater vertical hang control, ideal for creating skin pockets, deep cuts, and holes.
  • Functions as a bio-adhesive, adhering silicone appliances or masks to hard-to-hold areas like elbows, fingers, and joints.
  • Releases from short hair-covered skin surfaces such as beards, moustaches, and eyebrows.

Instructions

  • Mix parts thoroughly until uniform. 
  • Apply directly to clean skin or prosthetic. 
  • Working time is short, so sculpt quickly as needed. 
  • Press firmly for adhesion. 
  • Add pigments during mixing if desired. 
  • Use THI-VEX™ to thicken if needed. 
  • Allow to cure fully before movement. 
  • Remove gently after use. 
  • Avoid the eyes and test on a small skin area first.

Specifications

Color Translucent Clear
Cure Time 5 minutes
Pot Life 3 minutes at 73°F/23°C
Specific Gravity 1.07 g/cc
Mix Ratio 1A:1B by weight or volume
Operating Temperature Room temperature (72°F/22°C)
Available in Platinum Cure Silicone
Product Color Cure Time Pot Life Specific Gravity Mix Ratio Operating Temperature Tack Free Time Elongation At Break Pot Life With Solvent Pot Life Without Solvent Cure Time Without Solvent Maximum Heat Exposure Cure Time Shore A Hardness Specific Gravity Specific Volume Shrinkage Dielectric Strength Dielectric Constant 100hz Mixed Viscocity Mix Ratio By Volume Mix Ratio By Weight Pot Life Mixed Viscocity Specific Volume Mix Ratio By Weight Shrinkage Dielectric Strength Mix Ratio By Volume Dielectric Constant 100hz Shore A Hardness Tensile Strength Elongation At Break Hundred Percent Modulus Die B Tear Strength Hundred Percent Modulus Die B Tear Strength Tensile Strength
Skin Tite™ Translucent Clear 5 min. 3 min. at 73°F/23°C 1.07 g/cc 1A:1B by weight or volume Room temperature (72°F/22°C) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Psycho Paint Translucent Clear - - 1.07 g/cc 1A : 1B + solvent by weight or volume - 2 h. at 73°F/23°C 1000% 45 min. at 73°F/23°C 20 min. at room temperature 2 h. at room temperature 212°F/100°C - - - - - - - - - - - - - - - - - - - - - - - - - -
Rubber Glass™ Clear 16 h. 120 min. 0.97 g/cc - - - - - - - - 16 h. 33 0.97 g/cc 28.6 cu. in./lb. <.001 in. / in. 319 volts/mil 3.17 150 cps 1A:1B 1A:1B 120 min. 150 cps 28.6 cu. in./lb. 1A:1B <.001 in. / in. 319 volts/mil 1A:1B 3.170000 33 - - - - - - -
Encapso™ K Clear 16 h. 120 min. 0.97 g/cc - - - - - - - - 16 h. 33 0.97 g/cc 28.6 cu. in./lb. 0.001 in. / in. 319 volts/mil 3.17 150 cps 1A:1B 1A:1B 120 min. 150 cps 28.6 cu. in./lb. 1A:1B 0.001 in. / in. 319 volts/mil 1A:1B 3.170000 33 - - - - - - -
EZ-Brush™ Vac Bag Silicone Translucent Green 3.5 h. 30 min. 1.08 g/cc - - - 364 % - - - - 3.5 h. 20 1.08 g/cc 25.7 cu. in./lb. <.001 in. / in. - - 20,000 cps 1A:1B 1A:1B 30 min. 20,000 cps 25.7 cu. in./lb. 1A:1B <.001 in. / in. - 1A:1B - 20 550 psi 364 % 46 psi 120 pli 46 psi 120 pli 550 psi

Why buy at FormX?

Subscribe to our Newsletter

Receive €5,- discount on your first purchase!

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.