Description
This two-part epoxy putty combines the ease of clay handling with epoxy strength. It features a bright, clean white tone, suitable for restoration, fine art, model building, and precision sculpting. The putty has a smooth, pliable consistency, making it easy to mix and apply, allowing for detailed shaping, blending, and feathering during its 2–3 hour working time. Once fully cured in 24 hours, it becomes rock hard with a semi-gloss white finish that maintains its color over time.
Features
- Adheres permanently to most surfaces, including plastic, resin, wood, metal, ceramic, foam, fiberglass, and glass.
- Waterproof and non-toxic.
- Free of shrinkage or cracking.
- Cured surface can be sanded, drilled, carved, or painted without flaking or chipping.
- Cleanup is simple with water or Aves® Safety Solvent.
- Suitable for indoor and outdoor use.
Instructions
Usage Instructions
Mix in equal parts by volume until a uniform color is achieved. The material has a working time of approximately 2–3 hours, allowing ample time for sculpting, shaping, blending, and detailing. Apply directly to clean, dry surfaces; it bonds well to materials such as plastic, resin, wood, metal, ceramic, glass, foam, fiberglass, and many polymers. Shape using hands or sculpting tools. Use water to smooth surfaces and blend seams during the working time. Allow the material to cure undisturbed; it will harden rock solid in approximately 24 hours. After curing, it can be sanded, drilled, carved, machined, or painted without cracking or shrinking. Finished pieces are waterproof and suitable for indoor or outdoor use.
Safety InstructionsNon-toxic when used as directed, but standard safety practices should be followed. Wear gloves if you have sensitive skin or will be working for extended periods. Avoid prolonged skin contact and avoid contact with eyes. In case of skin contact, wash with soap and water. If material gets into eyes, rinse immediately with plenty of clean water and seek medical advice if irritation persists. Do not ingest. Use in a well-ventilated area. Keep components tightly closed when not in use and store at room temperature. Keep out of reach of children. Clean tools and hands with water or Aves® Safety Solvent before the material cures.
