Body Double™ Standard Set

BDpint ⓘ C2118A5D-9E8F-BE47-B21C-C6CC95B7D10C

Long-lasting platinum-cure, skin-safe silicone rubber for on-skin molds.

  • Shore Hardness: 25 A
  • Mix Ratio: 1A:1B
  • Pot Life: 5 min
  • Cure Time: 20 min
  • Color: Purple
€ 42.19

(€ 51.05 with 21% VAT)

In stock

Description

This silicone rubber is designed for creating molds of body parts with high detail. It is skin-safe. Molds can be used for multiple castings with materials like plaster, wax, and resins.

Features

  • Reusable for multiple castings
  • Less material needed compared to alginates
  • Self-releasing with HYPERFOLIC™ additive
  • Suitable for larger surface areas
  • Working time: 5 minutes, Demold time: 20 minutes

Technical Properties

  • Mix Ratio By Volume: 1A:1B
  • Mix Ratio By Weight: 1A:1B
  • Pot Life: 5 minutes
  • Cure Time: 20 minutes
  • Shore Hardness: 25 A
  • Specific Gravity: 1.17 g/cc
  • Specific Volume: 1.45 cm³/g (23.7 cu. in./lb.)
  • Color: Purple
  • Tensile Strength: 3.62 MPa (525 psi)
  • Die C Tear Strength: 7.0 kN/m (40 pli)
  • Elongation @ Break: 500%

Instructions

Preparation

Store and use at room temperature (23°C / 73°F). Warmer temperatures reduce working and cure times. Wear safety glasses, long sleeves, and rubber gloves. Use flat, stiff mixing sticks.

Safety

  • Test on a small skin area for allergic reactions.
  • Do not ingest or use inside the mouth.
  • Avoid open eye contact.
  • Perform life casting with at least three people.
  • Ensure skin is clean and free of contaminants to avoid cure inhibition.

Releasing

Use Body Double™ Release Cream or HYPER-FOLIC™ Release Additive to minimize mechanical lock on hair. Shave the molding area if necessary.

Measuring & Mixing

For the “Standard Set”, mix 1A:1B by volume. Stir thoroughly before dispensing. Apply with a soft bristle brush. For the initial layer, use Silicone Thinner™ if needed. Add new material promptly to avoid seam lines.

Applying a Support Shell, Demolding & Casting

Use Gypsona™ Plaster Bandages for support shells. Apply petroleum jelly to the rubber mold surface before applying bandages. Demold carefully, cutting encapsulated hair if necessary. Remove release cream with make-up remover or baby oil. Store the cured mold in the support shell for best results.

Specifications

Color Purple
Mixed Viscocity Brushable
Cure Time 20 minutes
Pot Life 5 minutes
Specific Volume 23.7 cu. in./lb.
Die C Tear Strength 40 pli
Specific Gravity 1.17 g/cc
Mix Ratio By Weight 1A:1B
Shrinkage <.001 in. / in.
Mix Ratio By Volume 1A:1B
Tensile Strength 525 psi
Elongation At Break 500 %
Shore A Hardness 25
Product Cure Time Specific Volume Mixed Viscocity Mix Ratio By Volume Mix Ratio By Weight Pot Life Color Mixed Viscocity Cure Time Pot Life Specific Volume Mix Ratio By Weight Mix Ratio By Volume Shore A Hardness Specific Gravity Shrinkage Specific Gravity Shrinkage Shore A Hardness Tensile Strength Die C Tear Strength Elongation At Break Die C Tear Strength Tensile Strength Elongation At Break
Alja-Safe™ 8 min. 26 cu. in./lb. Variable 1 Part Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder 4 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder 5 min. Light Purple Variable 8 min. 5 min. 26 cu. in./lb. 4 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder 1 Part Warm Water (80° F / 27° C) to 1 Part Alja-Safe Powder - - - - - - - - - - - -
Alja-Safe™ Acrobat 8 min. 26 cu. in./lb. Variable 1 Part warm water (80° F / 27° C) to 1 Part Alja-Safe Acrobat® powder 3 parts water to 1 part Acrobat® by weight 5 min. Off White Variable 8 min. 5 min. 26 cu. in./lb. 3 parts water to 1 part Acrobat® by weight 1 Part warm water (80° F / 27° C) to 1 Part Alja-Safe Acrobat® powder - - - - - - - - - - - -
Alja-Safe™ Breeze 8 min. 26 cu. in./lb. Variable 5 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Breeze liquid - 3 min. Blue Variable 8 min. 3 min. 26 cu. in./lb. - 5 Parts Warm Water (80° F / 27° C) to 1 Part Alja-Safe Breeze liquid - - - - - - - - - - - -
Body Double™ SILK 20 min. 30.4 cu. in./lb. Brushable 1A:1B 1A:1B 6 min. Green Brushable 20 min. 6 min. 30.4 cu. in./lb. 1A:1B 1A:1B 25 0.91 g/cc <.001 in. / in. 0.91 g/cc <.001 in. / in. 25 - - - - - -
Body Double™ Standard Set 20 min. 23.7 cu. in./lb. Brushable 1A:1B 1A:1B 5 min. Purple Brushable 20 min. 5 min. 23.7 cu. in./lb. 1A:1B 1A:1B 25 1.17 g/cc <.001 in. / in. 1.17 g/cc <.001 in. / in. 25 525 psi 40 pli 500 % 40 pli 525 psi 500 %
Body Double™ Fast Set 7 min. 23.7 cu. in./lb. Brushable 1A:1B 1A:1B 90 sec. Aqua, Green Brushable 7 min. 90 sec. 23.7 cu. in./lb. 1A:1B 1A:1B 25 1.17 g/cc <.001 in. / in. 1.17 g/cc <.001 in. / in. 25 450 psi 40 pli 500 % 40 pli 450 psi 500 %
Body Double™ Dispensing Gun - - - - - - - - - - - - - - - - - - - - - - - - -
Body Double™ Mixing Tubes - - - - - - - - - - - - - - - - - - - - - - - - -
Body Double™ Release Additive - - - - - - - - - - - - - - - - - - - - - - - - -
Body Double™ Release Cream - - - - - - - - - - - - - - - - - - - - - - - - -

Why buy at FormX?

Subscribe to our Newsletter

Receive €5,- discount on your first purchase!

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.