Last update 21-05-2026

Disclaimer

Welcome to FormX

By using this website and purchasing products from FormX, you agree to the terms outlined in this disclaimer.

1. General Information

All information provided on this website, including product descriptions, technical advice, tutorials, application examples and recommendations, is provided for general informational purposes only.

While we strive to keep information accurate and up to date, FormX makes no guarantees regarding completeness, accuracy or suitability for a specific application, production process or end use.

2. Product Suitability & Testing

Customers are solely responsible for determining whether a product is suitable for their intended application.

Due to variations in:

  • materials
  • environmental conditions
  • processing methods
  • storage conditions
  • mixing ratios
  • equipment and tooling

results may vary significantly.

FormX strongly recommends conducting small-scale tests before full production or commercial use.

3. Technical Advice

Technical recommendations and support provided by FormX are based on practical experience and information supplied by manufacturers. Such advice is given in good faith but does not constitute a guarantee of performance or final results.

Customers remain fully responsible for:

  • product selection
  • process validation
  • testing
  • production methods
  • safety procedures
  • final application suitability

4. Safety & Hazardous Materials

Many products sold by FormX are intended for professional, industrial, artistic or technical use and may involve hazardous chemicals or materials.

Users are responsible for:

  • reading the latest Safety Data Sheets (SDS)
  • following Technical Data Sheets (TDS)
  • using appropriate personal protective equipment (PPE)
  • ensuring adequate ventilation
  • complying with local regulations regarding storage, transport and handling

Improper use may result in health risks, material failure or property damage.

5. SDS / TDS Documentation

Technical Data Sheets (TDS) and Safety Data Sheets (SDS) are provided for reference purposes only and may be updated by manufacturers without prior notice.

Customers are responsible for consulting the latest available documentation before use.

6. Shelf Life & Storage

Shelf life information provided by FormX or manufacturers is intended as a guideline only.

Product usability may be affected by:

  • storage conditions
  • temperature fluctuations
  • humidity
  • contamination after opening
  • prolonged storage

Improper storage may affect product performance and void any responsibility from FormX.

7. Product Appearance & Batch Variations

Colors, textures and material properties may vary slightly between production batches. Product images shown on the website are for illustrative purposes only and may differ from actual products.

8. Limitation of Liability

To the maximum extent permitted by law, FormX shall not be liable for:

  • indirect or consequential damages
  • production losses
  • downtime
  • lost profits
  • failed castings or molds
  • incompatibility between materials
  • improper processing or application
  • damages resulting from misuse or incorrect storage

Total liability shall in all cases be limited to the purchase value of the products supplied.

9. Website Availability & Errors

FormX reserves the right to:

  • modify product specifications
  • change pricing
  • correct errors or inaccuracies
  • update or discontinue products without prior notice

Temporary interruptions or technical issues affecting website availability may occur.

10. Intellectual Property

All website content, including:

  • text
  • product descriptions
  • images
  • graphics
  • logos
  • technical content

remains the property of FormX or its respective licensors and may not be copied, reproduced or distributed without written permission.

11. Applicable Law

This disclaimer and all use of this website shall be governed by the laws of the Netherlands.

Any disputes arising from the use of this website or the purchase of products shall be submitted to the competent courts in the Netherlands.

12. Contact

For questions regarding this disclaimer, please contact:

FormX www.formx.eu Email:info@formx.nl

Why buy at FormX?

  • Dedication to Materials

    Dedication to Materials icon

    For over thirty years we have sought out the highest quality modelling, moulding and casting materials from around the world.

  • Inspiring + Unique

    Inspiring + Unique icon

    From silicones and resins to Jesmonite and special effects materials — a curated range for professionals, artists and makers.

  • Expert Advice

    Expert Advice icon

    Our sales team is widely known for their knowledge and dedication, supporting you in mould making, casting, sculpture and prototyping.

  • Shipping Across Europe

    Shipping Across Europe icon

    We ship from our warehouses in Amsterdam, Barcelona and Madrid to customers throughout Europe, from Greece up to Norway.

  • Amsterdam Original

    Amsterdam Original icon

    Founded in Amsterdam, FormX grew from a local art foundry into a major European supplier — with our roots firmly in the city.

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
This website has been developed by Usecue B.V.
© 2026 FormX B.V.