EZ Spray system

EZ-Spray Jr. Spray Gun - is a versatile, convenient and easy-to-use spray system for spraying moldmaking and casting materials. Available with Smooth-On’s cartridges containing spray rubber, plastic or foam. Gun controls the delivery rate of material through the static mixer and air flow

{{/* Technical bulletin EZ-Spray 20 silicone — PDF 404 on smooth-on.com */}} Technical bulletin EZ-Spray 35 silicone Technical bulletin EZ-Spray Plastic Technical bulletin EZ-Spray 45 Urethane rubber Technical bulletin EZ-Spray Foam Technical bulletin EZ-Spray Styrocoat

EZ-Spray Jr.

EZ-Spray™ Gun

... € 1192.60 Buy now

EZ-Spray Silicone

EZ-Spray 20 Silicone

EZ-Spray™ Silicone 20

... € 415.26 Buy now

EZ~~Spray® Silicone 20 is a sprayable silicone that cures quickly to a soft rubber with high elongation and tear strength.Liquid silicone is sprayed through the EZ~~Spray® Junior Cartridge System which is an economical alternative to expensive spray equipment. After a suitable spray thickness is attained, EZ~Spray® Silicone 20 cures in about 10 minutes with negligible shrinkage to a strong, durable mold rubber good for production casting of polyester, epoxy or urethane resins, gypsum, concrete and other materials.

EZSpray® Silicone 20 is effective at making fast, cost effective vacuum bags for producing composite parts. Newly sprayed or injected bags can be removed from the mold in 10 minutes and used immediately in production with polyester or epoxy resin systems. The advantage that EZSpray® Silicone 20 offers vs. conventional vacuum bagging systems is the speed at which a production-ready silicone bags can be made resulting in significant time and labor savings.Yield - Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 3/8 inches (0.95 cm), one cartridge of EZ~Spray® Silicone 20 will cover approximately 1.66 sq. ft. (0.15 square meters).

EZ-Spray Silicone 35

EZ-Spray 35 Silicone is a sprayable poly-addition silicone system with a very fast processing cycle. The silicone cures within one hour to a shore A35 value. This rubber is suitable for casting resins, foams, gypsum, cement/concrete mortars etc.