Mold Star 40T /8,16kg

Mold Star™ 14T, 19T, 20T, 31T and 40T are easy to use translucent platinum cure silicones that are mixed 1A:1B by volume (no weighing scale necessary). They feature a relatively low viscosity and vacuum degassing is not required for most applications. Mold Star™ T Series silicone cures to a soft, strong rubber that is tear resistant and exhibits very low long term shrinkage. Molds made with Mold Star™ silicone will last a long time in your mold library and are good for casting wax, gypsum, resins, and other materials. An infinite number of color effects can be achieved by adding Silc Pig™ silicone pigments or Cast Magic™ effects powders.

Properly cured Mold Star™ 40T complies with 21 CFR 177.2600 "Rubber articles intended for repeated use" for use with dry food and aqueous food only. This material has been tested by an independent laboratory to comply with 21 CFR 177.2600(e), water extractable limits for repeated use in aqueous food. This material is not intended for repeated use in contact with fatty foods.

Features:

Mold Star™ T Series silicones are heat resistant up to 450°F (232°C) and are suitable for casting low-temperature melt metal alloys.

Note:This product will not cure against surfaces containing sulfur, even when sealed.

Cured Mold Star™ T Series silicones have been tested and certified skin safe by an independent laboratory.

Mold Star™ 40T is dry food safe and suitable for use with water/ice

Mix Ratio By Volume 1A:1B - Mix Ratio By Weight 1A:1B Pot Life 20 minutes Cure Time 3 hours - Shore Hardness 40 A